Search the Community

Добрый день. Debian 10, Linux 5.4.0-0.bpo.3-amd64 #1 SMP Debian 5.4.13-1~bpo10+1 (2020-02-07) x86_64 GNU/Linux Необходим драйвер для Moxa Uport 1250I

Всем доброго дня! Пытаюсь на Fedora 30 собрать драйвер https://www.moxa.com/Moxa/media/PDIM/S100000199/moxa-real-tty-drivers-for-linux-3.x.x-4.x.x-driver-v1.19.tgz. Все зависимости последней версии. После запуска ./moxa/mxinst m64 пишет: awk: fatal: cannot open file `np_ver.h' for reading (No such file or directory) =============================================================================== Copyright (C) 2002-2017 Moxa Inc. All Rights Reserved. MOXA NPort Server Real TTY Driver Installation. System Information: Kernel 5.2.7-200.fc30.x86_64; Machine x86_64. =============================================================================== Building driver... If you want to use secure communication with target, you might choose [y] to enable the SSL function. Note: This function support RealCOM with secure mode only. Do you want to enable secure function? [y/N]. y make: *** Нет правила для сборки цели «ssl64». Останов. Check Driver... FAILED !!! Install Not Completed ! Где интересно ошибка? Команда ldconfig -p | grep libssl.so выводит такое: libssl.so.1.1 (libc6,x86-64) => /lib64/libssl.so.1.1 libssl.so (libc6,x86-64) => /lib64/libssl.so openssl-devel-1:1.1.1c и openssl-1:1.1.1c установлены. С переходом в папку moxa и запуск ./mxinst m64 выдает следующее: =============================================================================== Copyright (C) 2002-2017 Moxa Inc. All Rights Reserved. MOXA NPort Server Real TTY Driver Ver1.19 Installation. System Information: Kernel 5.2.7-200.fc30.x86_64; Machine x86_64. =============================================================================== Building driver... If you want to use secure communication with target, you might choose [y] to enable the SSL function. Note: This function support RealCOM with secure mode only. Do you want to enable secure function? [y/N]. y make -C /lib/modules/5.2.7-200.fc30.x86_64/build SUBDIRS=/tmp/moxa modules make[1]: вход в каталог «/usr/src/kernels/5.2.7-200.fc30.x86_64» Makefile:213: ================= WARNING ================ Makefile:214: 'SUBDIRS' will be removed after Linux 5.3 Makefile:215: Please use 'M=' or 'KBUILD_EXTMOD' instead Makefile:216: ========================================== CC [M] /tmp/moxa/npreal2.o /tmp/moxa/npreal2.c: В функции «npreal_ioctl»: /tmp/moxa/npreal2.c:1323:60: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 1323 | error = access_ok(VERIFY_WRITE, (void *)arg, sizeof(long))?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | /tmp/moxa/npreal2.c:1323:11: ошибка: «access_ok» не описан (первое использование в этой функции) 1323 | error = access_ok(VERIFY_WRITE, (void *)arg, sizeof(long))?0:-EFAULT; | ^~~~~~~~~ /tmp/moxa/npreal2.c:1323:11: замечание: сообщение о каждом неописанном идентификаторе выдается один раз в каждой функции, где он встречается /tmp/moxa/npreal2.c:1330:59: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 1330 | error = access_ok(VERIFY_READ, (void *)arg, sizeof(long))?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | /tmp/moxa/npreal2.c:1346:33: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 1346 | sizeof(struct serial_struct))?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | /tmp/moxa/npreal2.c:1353:33: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 1353 | sizeof(struct serial_struct))?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | /tmp/moxa/npreal2.c:1360:25: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 1360 | sizeof(unsigned int))?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | /tmp/moxa/npreal2.c:1417:42: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 1417 | sizeof(struct serial_icounter_struct))?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | /tmp/moxa/npreal2.c: В функции «npreal_net_ioctl»: /tmp/moxa/npreal2.c:3374:50: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 3374 | rtn = access_ok( VERIFY_WRITE, (void *)arg, len)?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | /tmp/moxa/npreal2.c:3374:9: ошибка: «access_ok» не описан (первое использование в этой функции) 3374 | rtn = access_ok( VERIFY_WRITE, (void *)arg, len)?0:-EFAULT; | ^~~~~~~~~ /tmp/moxa/npreal2.c:3398:52: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 3398 | rtn = access_ok( VERIFY_READ, (void *)arg, size )?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | /tmp/moxa/npreal2.c:3523:52: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 3523 | rtn = access_ok( VERIFY_READ, (void *)arg, size )?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | /tmp/moxa/npreal2.c:3548:52: ошибка: в макрос «access_ok» передано 3 аргументов, но используется только 2 3548 | rtn = access_ok( VERIFY_READ, (void *)arg, size )?0:-EFAULT; | ^ In file included from ./include/linux/uaccess.h:11, from ./include/asm-generic/termios.h:6, from ./arch/x86/include/uapi/asm/termios.h:1, from ./include/uapi/linux/termios.h:6, from ./include/linux/tty.h:7, from /tmp/moxa/npreal2.c:50: ./arch/x86/include/asm/uaccess.h:91: замечание: macro "access_ok" defined here 91 | #define access_ok(addr, size) \ | make[2]: *** [scripts/Makefile.build:285: /tmp/moxa/npreal2.o] Ошибка 1 make[1]: *** [Makefile:1601: _module_/tmp/moxa] Ошибка 2 make[1]: выход из каталога «/usr/src/kernels/5.2.7-200.fc30.x86_64» make: *** [Makefile:71: module] Ошибка 2 Check Driver... FAILED !!! Install Not Completed !

Здравствуйте! Существует драйвер для 4 ядра?

Добрый день! Есть карта CP-132EL-I-DB9M (http://moxa.ru/shop/boards/pci_express/cp-132el/cp-132el-i/). Не получается установить драйвер на AstraLinux 1.11 Common Edition (ядро 4.2.0-23-generic). build.log прилагаю: Где взять новый драйвер? Спасибо!

Добрый день. Очень бы хотелось подключить uport к raspberry, архитектура ARM. Что можно сделать? Спасибо.

имеется компьютер с платой CP-118U и Debian squeeze ставлю драйвер согласно Quick Installation Guide команда make clean; make install вылетает с ошибкой: Build Fail! Please check build.log for further information and send it to support@moxa.com. make[1]: *** [module] Error 1 make: *** [driver_install] Error 2 содежимое лог файла: ********************************************************************** Debian GNU/Linux 6.0 \l 2.6.32-5-686 MOXA Smartio/Industio Family Multiport Board Device Driver ver 1.16 Release Date: 2014/03/03 ********************************************************************** make[2]: *** No rule to make target `modules'. Stop. перед этим появлялась другая ошибка: "отсутствует директория build в /lib/modules/2.6.32-5-686" я создал эту директорию вручную и стала появляться ошибка описанная выше в чём может быть причина?

Здравствуйте, А есть актуальная liux версия драйвера для UPort 2410?

Добрый день! При попытке _открыть_ (т.е. syscall 'open') /dev/mxupcie (утилита msdiag) (драйвер v1.15.27_build_13093015, http://mtsc.moxa.com:8888/Software/ha/msb/SmartioIndustio/Driver/Linux/) для Linux 3.9.9 получаем kernel panic: ... Oct 9 15:43:52 storekeeper kernel: [ 2.940783] MOXA Smartio/Industio family driver version 1.15.27 Oct 9 15:43:52 storekeeper kernel: [ 2.940795] Found MOXA CP-168EL-A series board(BusNo=6,DevNo=0) Oct 9 15:43:52 storekeeper kernel: [ 2.940862] ttyMUE0 - ttyMUE7 max. baud rate = 921600 bps. Oct 9 15:43:52 storekeeper kernel: [ 2.940909] Found MOXA CP-168EL-A series board(BusNo=7,DevNo=0) Oct 9 15:43:52 storekeeper kernel: [ 2.940945] ttyMUE8 - ttyMUE15 max. baud rate = 921600 bps. ... Oct 9 15:47:23 storekeeper kernel: [ 214.308790] ------------[ cut here ]------------ Oct 9 15:47:23 storekeeper kernel: [ 214.308795] WARNING: at drivers/tty/tty_io.c:1425 tty_init_dev+0x1c0/0x1d0() Oct 9 15:47:23 storekeeper kernel: [ 214.308796] Hardware name: System Product Name Oct 9 15:47:23 storekeeper kernel: [ 214.308797] tty_init_dev: ttyMUE driver does not set tty->port. This will crash the kernel later. Fix the driver! Oct 9 15:47:23 storekeeper kernel: [ 214.308798] Modules linked in: e100 mxupcie(O) e1000 Oct 9 15:47:23 storekeeper kernel: [ 214.308801] Pid: 4646, comm: msdiag Tainted: G O 3.9.9 #1 Oct 9 15:47:23 storekeeper kernel: [ 214.308802] Call Trace: Oct 9 15:47:23 storekeeper kernel: [ 214.308806] [<ffffffff8103a4fa>] warn_slowpath_common+0x7a/0xc0 Oct 9 15:47:23 storekeeper kernel: [ 214.308808] [<ffffffff8103a5e1>] warn_slowpath_fmt+0x41/0x50 Oct 9 15:47:23 storekeeper kernel: [ 214.308809] [<ffffffff81406c10>] tty_init_dev+0x1c0/0x1d0 Oct 9 15:47:23 storekeeper kernel: [ 214.308811] [<ffffffff8140739b>] tty_open+0x15b/0x600 Oct 9 15:47:23 storekeeper kernel: [ 214.308813] [<ffffffff814c04f3>] ? kobj_lookup+0x103/0x160 Oct 9 15:47:23 storekeeper kernel: [ 214.308816] [<ffffffff8112bf20>] ? mount_fs+0x1b0/0x1b0 Oct 9 15:47:23 storekeeper kernel: [ 214.308817] [<ffffffff8112c898>] chrdev_open+0x98/0x180 Oct 9 15:47:23 storekeeper kernel: [ 214.308819] [<ffffffff8112c800>] ? cdev_put+0x30/0x30 Oct 9 15:47:23 storekeeper kernel: [ 214.308822] [<ffffffff8112655e>] do_dentry_open+0x21e/0x2a0 Oct 9 15:47:23 storekeeper kernel: [ 214.308824] [<ffffffff81126740>] finish_open+0x30/0x40 Oct 9 15:47:23 storekeeper kernel: [ 214.308826] [<ffffffff811360ae>] do_last+0x72e/0xe60 Oct 9 15:47:23 storekeeper kernel: [ 214.308827] [<ffffffff81133033>] ? inode_permission+0x13/0x50 Oct 9 15:47:23 storekeeper kernel: [ 214.308828] [<ffffffff811330d7>] ? link_path_walk+0x67/0x8e0 Oct 9 15:47:23 storekeeper kernel: [ 214.308830] [<ffffffff81136893>] path_openat+0xb3/0x4a0 Oct 9 15:47:23 storekeeper kernel: [ 214.308831] [<ffffffff811373dd>] do_filp_open+0x3d/0xa0 Oct 9 15:47:23 storekeeper kernel: [ 214.308833] [<ffffffff81143675>] ? __alloc_fd+0x45/0x120 Oct 9 15:47:23 storekeeper kernel: [ 214.308835] [<ffffffff81127a99>] do_sys_open+0xf9/0x1e0 Oct 9 15:47:23 storekeeper kernel: [ 214.308836] [<ffffffff81127b9c>] sys_open+0x1c/0x20 Oct 9 15:47:23 storekeeper kernel: [ 214.308839] [<ffffffff817b7512>] system_call_fastpath+0x16/0x1b Oct 9 15:47:23 storekeeper kernel: [ 214.308840] ---[ end trace a73eb7c35b7ee2de ]--- Oct 9 15:47:23 storekeeper kernel: [ 214.308842] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Oct 9 15:47:23 storekeeper kernel: [ 214.308871] IP: [<ffffffff81406ae3>] tty_init_dev+0x93/0x1d0 Oct 9 15:47:23 storekeeper kernel: [ 214.308889] PGD 40a9c4067 PUD 40c031067 PMD 0 Oct 9 15:47:23 storekeeper kernel: [ 214.308912] Oops: 0002 [#1] SMP Oct 9 15:47:23 storekeeper kernel: [ 214.308928] Modules linked in: e100 mxupcie(O) e1000 Oct 9 15:47:23 storekeeper kernel: [ 214.308951] CPU 3 Oct 9 15:47:23 storekeeper kernel: [ 214.308959] Pid: 4646, comm: msdiag Tainted: G W O 3.9.9 #1 System manufacturer System Product Name/P8H77-V LE Oct 9 15:47:23 storekeeper kernel: [ 214.308991] RIP: 0010:[<ffffffff81406ae3>] [<ffffffff81406ae3>] tty_init_dev+0x93/0x1d0 Oct 9 15:47:23 storekeeper kernel: [ 214.309016] RSP: 0018:ffff88040db23b78 EFLAGS: 00010296 Oct 9 15:47:23 storekeeper kernel: [ 214.309032] RAX: 0000000000000000 RBX: ffff880409bab000 RCX: 0000000000000006 Oct 9 15:47:23 storekeeper kernel: [ 214.309051] RDX: 0000000000000007 RSI: 0000000000000000 RDI: 0000000000000009 Oct 9 15:47:23 storekeeper kernel: [ 214.309071] RBP: ffff88040db23ba8 R08: 000000000000000a R09: 0000000000000000 Oct 9 15:47:23 storekeeper kernel: [ 214.309091] R10: 00000000000003c0 R11: 00000000000003bf R12: 0000000000000020 Oct 9 15:47:23 storekeeper kernel: [ 214.309111] R13: ffff8804097b8000 R14: 0000000001f00020 R15: 0000000000008002 Oct 9 15:47:23 storekeeper kernel: [ 214.309132] FS: 00007fb5564af700(0000) GS:ffff88041fac0000(0000) knlGS:0000000000000000 Oct 9 15:47:23 storekeeper kernel: [ 214.309158] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 9 15:47:23 storekeeper kernel: [ 214.309175] CR2: 0000000000000050 CR3: 000000040b4fa000 CR4: 00000000001407e0 Oct 9 15:47:23 storekeeper kernel: [ 214.309195] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Oct 9 15:47:23 storekeeper kernel: [ 214.309215] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Oct 9 15:47:23 storekeeper kernel: [ 214.309235] Process msdiag (pid: 4646, threadinfo ffff88040db22000, task ffff88040ad94ba0) Oct 9 15:47:23 storekeeper kernel: [ 214.309258] Stack: Oct 9 15:47:23 storekeeper kernel: [ 214.309265] 0000000001f00020 0000000000008002 ffff88040db23ba8 ffff88040c1e8f00 Oct 9 15:47:23 storekeeper kernel: [ 214.309293] 0000000000000000 ffff8804097b8000 ffff88040db23c28 ffffffff8140739b Oct 9 15:47:23 storekeeper kernel: [ 214.309321] ffff88040db23c28 ffffffff814c04f3 ffff88040c1e8f00 ffff880408dbaad8 Oct 9 15:47:23 storekeeper kernel: [ 214.309349] Call Trace: Oct 9 15:47:23 storekeeper kernel: [ 214.309359] [<ffffffff8140739b>] tty_open+0x15b/0x600 Oct 9 15:47:23 storekeeper kernel: [ 214.309375] [<ffffffff814c04f3>] ? kobj_lookup+0x103/0x160 Oct 9 15:47:23 storekeeper kernel: [ 214.309392] [<ffffffff8112bf20>] ? mount_fs+0x1b0/0x1b0 Oct 9 15:47:23 storekeeper kernel: [ 214.309408] [<ffffffff8112c898>] chrdev_open+0x98/0x180 Oct 9 15:47:23 storekeeper kernel: [ 214.309425] [<ffffffff8112c800>] ? cdev_put+0x30/0x30 Oct 9 15:47:23 storekeeper kernel: [ 214.309441] [<ffffffff8112655e>] do_dentry_open+0x21e/0x2a0 Oct 9 15:47:23 storekeeper kernel: [ 214.309459] [<ffffffff81126740>] finish_open+0x30/0x40 Oct 9 15:47:23 storekeeper kernel: [ 214.309475] [<ffffffff811360ae>] do_last+0x72e/0xe60 Oct 9 15:47:23 storekeeper kernel: [ 214.309490] [<ffffffff81133033>] ? inode_permission+0x13/0x50 Oct 9 15:47:23 storekeeper kernel: [ 214.309508] [<ffffffff811330d7>] ? link_path_walk+0x67/0x8e0 Oct 9 15:47:23 storekeeper kernel: [ 214.309525] [<ffffffff81136893>] path_openat+0xb3/0x4a0 Oct 9 15:47:23 storekeeper kernel: [ 214.309541] [<ffffffff811373dd>] do_filp_open+0x3d/0xa0 Oct 9 15:47:23 storekeeper kernel: [ 214.309558] [<ffffffff81143675>] ? __alloc_fd+0x45/0x120 Oct 9 15:47:23 storekeeper kernel: [ 214.309574] [<ffffffff81127a99>] do_sys_open+0xf9/0x1e0 Oct 9 15:47:23 storekeeper kernel: [ 214.309590] [<ffffffff81127b9c>] sys_open+0x1c/0x20 Oct 9 15:47:23 storekeeper kernel: [ 214.309606] [<ffffffff817b7512>] system_call_fastpath+0x16/0x1b Oct 9 15:47:23 storekeeper kernel: [ 214.309624] Code: 8b 85 a0 00 00 00 48 89 de 4c 89 ef 48 8b 40 08 48 85 c0 74 6b ff d0 85 c0 78 75 48 8b 83 48 02 00 00 48 85 c0 0f 84 9d 00 00 00 <48> 89 58 50 48 89 df 48 8b b3 88 01 00 00 e8 fa 7b 00 00 85 c0 Oct 9 15:47:23 storekeeper kernel: [ 214.309810] RIP [<ffffffff81406ae3>] tty_init_dev+0x93/0x1d0 Oct 9 15:47:23 storekeeper kernel: [ 214.309828] RSP <ffff88040db23b78> Oct 9 15:47:23 storekeeper kernel: [ 214.309839] CR2: 0000000000000050 Oct 9 15:47:23 storekeeper kernel: [ 214.309867] ---[ end trace a73eb7c35b7ee2df ]--- lspci -v: 06:00.0 Serial controller: Moxa Technologies Co Ltd CP-168EL-A (8-port RS-232 PCI Express Serial Board) (prog-if 02 [16550]) Subsystem: Moxa Technologies Co Ltd CP-168EL-A (8-port RS-232 PCI Express Serial Board) Flags: fast devsel, IRQ 18 I/O ports at c000 Memory at f7b00000 (32-bit, non-prefetchable) I/O ports at c040 Capabilities: <access denied> Kernel modules: mxupcie 07:00.0 Serial controller: Moxa Technologies Co Ltd CP-168EL-A (8-port RS-232 PCI Express Serial Board) (prog-if 02 [16550]) Subsystem: Moxa Technologies Co Ltd CP-168EL-A (8-port RS-232 PCI Express Serial Board) Flags: fast devsel, IRQ 19 I/O ports at b000 Memory at f7a00000 (32-bit, non-prefetchable) I/O ports at b040 Capabilities: <access denied> Kernel modules: mxupcie

Здравствуйте. Планируется ли обновления драйвера 1130l под ядро Linux 3.8?