Устанавливал на Ubuntu 12.04.4 из-за поддержки ядра до 3.11.
~$ cd ./mxser
~/mxser$ sudo ./mxinstall
**********************************************************************
Ubuntu 12.04.4 LTS
\l 3.11.0-15-generic
MOXA Smartio/Industio Family Multiport Board Device Driver ver 1.16
Release Date: 2014/03/03
**********************************************************************
**********************************************************************
MOXA Smartio/Industio Family Multiport Board Driver ver 1.16
installed successfully.
**********************************************************************
Loading driver...
**********************************************************************
MOXA Smartio/Industio Family driver ver 1.16 loaded successfully.
**********************************************************************
После установки:
~/mxser$ sudo ./utility/diag/msdiag
== MOXA Smartio/Industio Family Multiport Board Status Utility(1.4) ==
- PCI -
PCI tty device major number= 30.
PCI callout device major number= 35.
Board 1 : CP-114 series (BusNo=5, DevNo=1)
Port 1: 0xe480, max. baud rate = 921600 bps.
Port 2: 0xe488, max. baud rate = 921600 bps.
Port 3: 0xe490, max. baud rate = 921600 bps.
Port 4: 0xe498, max. baud rate = 921600 bps.
- PCIe -
PCIe tty device major number= 31.
PCIe callout device major number= 34.
No PCIe device found.
Обращение к устройству:
~/mxser$ sudo ./utility/conf/muestty -g /dev/ttyM0
muestty: /dev/ttyM0 is set to RS-232 mode.
muestty: /dev/ttyM0 none terminal resistor.
