yurmala Posted August 3, 2015 Share Posted August 3, 2015 Приветствую! Компьютер UC-8418-LX в момент включения на выходных цифровых каналах иногда (но не всегда) выставляет логическую "1", Эта "1" включает механизмы управления. Получается ситуация, при которой присутствует время до запуска в течение которого мы не контролируем механизмы. Можно ли это отключить? Требуется, чтобы в момент включения на выходах всегда был логический "0". Заранее спасибо за консультацию. Link to comment
yurmala Posted August 3, 2015 Author Share Posted August 3, 2015 Очень похожую ситуацию вычитал на этом форуме в этой теме: http://www.moxa.ru/forum/index.php?/topic/2474-w406-lx-%d0%bf%d0%b5%d1%80%d0%b5%d0%b7%d0%b0%d0%b3%d1%80%d1%83%d0%b7%d0%ba%d0%b0-%d0%b4%d0%b8%d1%81%d0%ba%d1%80%d0%b5%d1%82%d0%bd%d1%8b%d0%b5-%d0%b2%d1%8b%d1%85%d0%be%d0%b4%d1%8b/ Симптомы очень похожи на наши. Жаль в той теме не приведено решение. Жду ответа. Link to comment
Незнайка Posted August 3, 2015 Share Posted August 3, 2015 Здравствуйте! В той теме проблема была решена путём выпуска новой прошивки производителем. Сообщите пожалуйста аппаратную ревизию устройства, серийный номер, текущую версию прошивки и версию ОС - и мы попробуем спросить производителя, чем такому горю помочь. Link to comment
yurmala Posted August 4, 2015 Author Share Posted August 4, 2015 Спасибо за ответ! Вот что смог найти на коробке от ПК: UC-8418-T-LX/US/EU V1.0 TADDC 1008022 (сам ПК вмонтирован в стойку. Серийный номер скорее всего с обратной стороны. Если все же есть необходимость в его указании - сообщите, будем разбирать стойку) Информация из консоли ПК: Linux Moxa 2.6.23.1 #1036 от 21.03.12 F/W 2.1 build 12032111 Link to comment
Незнайка Posted August 4, 2015 Share Posted August 4, 2015 Собственно написал. Теперь только ждать... Link to comment
yurmala Posted August 4, 2015 Author Share Posted August 4, 2015 Незнайка, спасибо, будем ждать. Link to comment
Незнайка Posted August 5, 2015 Share Posted August 5, 2015 И снова здравствуйте! Поступил уточняющий запрос - в какой именно момент изменяется состояние DO при старте? 1. CPLD -Включение питания до первого сообщения на консоль 2. Bootloader – сообщения на консоли до старта Linux 3. Загрузка Linux Link to comment
yurmala Posted August 5, 2015 Author Share Posted August 5, 2015 Мы консольным кабелем не пользовались, поэтому не видим загрузчика. Но чисто по ощущениям - состояние изменяется в момент включения, после подачи напряжения питания. Сразу же. Либо доли секунды. Но точно до загрузки Linux (есть опыт работы с U-boot, поэтому понимаю что до загрузки ядра Linux проходит несколько секунд). Мне кажется - поймать разницу CPLD и запуск загрузчика - нереально. Разве нет? Link to comment
Незнайка Posted August 5, 2015 Share Posted August 5, 2015 Честно сказать - не знаю -) Но мне кажется - что реально. Чего отвечать то будем - первый вариант, получается? Link to comment
yurmala Posted August 5, 2015 Author Share Posted August 5, 2015 давайте я попробую консольный кабель подключить и понаблюдать. Завтра с утра отпишусь. п.с. Если просто остановиться на варианте 1, то тогда это будет явно аппаратная проблема, не решаемая программно. Link to comment
yurmala Posted August 7, 2015 Author Share Posted August 7, 2015 Попробовали. Вроде на уровне Bootloader пины выставляются. т.е. вариант 2. Link to comment
Незнайка Posted August 11, 2015 Share Posted August 11, 2015 Тут ещё вопрос - какая версия загрузчика? Узнать можно удерживая кнопку <DEL> в терминале при запуске. Должна появиться строчка вида: Boot Loader Version 2.7.1 B00. Умные люди при этом говорят, что из под Win7 DEL послать не получается, надо делать из под XP или из под Linux. Link to comment
Незнайка Posted August 14, 2015 Share Posted August 14, 2015 А нет ли у нас новостей в этом вопросе? -) Link to comment
Незнайка Posted August 27, 2015 Share Posted August 27, 2015 Видимо нет - но напишу, чтоб было. Есть рекомендация обновить Boot Loader. Как это сделать: Операция ответственная. Если обновление будет по каким-либо причинам прервано в процессе, - то устройство придет в негодность без возможности восстановления. >>>>>>>>>>>>>>>>>>>>> 1.1. Upgrade the bootloader 1.1.1. Power-on UC-8481-LX with pressing the "*" key in the Console Found MU860 module and init ok. Found NAND Flash : SAMSUNG K9F4G08U0D Init DIO OK RTC Init RTC Init ================================<<<Main Menu>>>================================ Boot Loader Version 2.5 S02 Kernel Version 3.0.4 CPU Endian: BE Make date: Jul 5 2012 20:57:56 Module Type: UC-8481-LX [0x80008481] Serial number:6 MAC Address(NPE): PORT1-00:90:e8:81:51:63 PORT2-00:90:e8:81:51:64 MAC Address(WAPN001): PORT1-00:03:7f:be:f0:34 =============================================================================== [0] Download Redboot [1] Download Kernel [2] Download RootDisk [3] Run Kernel [4] Change Boot Device [5] Download Image1 to Flash1 [6] Download Image2 to Flash2 [7] Set/Clean Flag [8] Set serial no. & MAC Address [9] WT Test [a] MP test Burning test [c] Network Configuration [d] Dump memory [e] Watchdog Test [f] SDRAM test [g] NorFlash test [h] RTC test NandFlash test [j] UART test [k] Embedded LAN test [l] LED test [m] Buzzer test [n] RLTK 8100 LAN test [o] Dio test [p] SW Button test [q] USB test [r] SRAM test Switch Board test [t] CAN Board test Cardbus LAN Card test [v] EMP-2422 test [w] Init RedBoot Config [x] RF test =============================================================================== 1.1.2. Select "c" to do "Network Configure" [0] Change IP Setting Please input the select : c ================================<<<TFTP Menu>>>================================ [0] Change IP Setting [1] Show Current IP Setting [z] Quit this menu. =============================================================================== Please input the select : 0 Local IP Address : 192.168.31.166 bootp_my_ip: Setting to 192.168.31.166 ... Unlock from 0x51fe0000-0x52000000: . ... Erase from 0x51fe0000-0x52000000: . ... Program from 0x1ffd0000-0x1fff0000 at 0x51fe0000: . ... Lock from 0x51fe0000-0x52000000: . bootp_my_ip_mask: Setting to 255.0.0.0 Server IP Address : 192.168.31.161 bootp_server_ip: Setting to 192.168.31.161 Set OK! ================================<<<TFTP Menu>>>================================ [0] Change IP Setting [1] Show Current IP Setting [z] Quit this menu. =============================================================================== Please input the select : z 1.1.3. Upgrade bootloader ================================<<<Main Menu>>>================================ Boot Loader Version 2.5 S02 Kernel Version 3.0.4 CPU Endian: BE Make date: Jul 5 2012 20:57:56 Module Type: UC-8481-LX [0x80008481] Serial number:6 MAC Address(NPE): PORT1-00:90:e8:81:51:63 PORT2-00:90:e8:81:51:64 MAC Address(WAPN001): PORT1-00:03:7f:be:f0:34 =============================================================================== [0] Download Redboot [1] Download Kernel [2] Download RootDisk [3] Run Kernel [4] Change Boot Device [5] Download Image1 to Flash1 [6] Download Image2 to Flash2 [7] Set/Clean Flag [8] Set serial no. & MAC Address [9] WT Test [a] MP test Burning test [c] Network Configuration [d] Dump memory [e] Watchdog Test [f] SDRAM test [g] NorFlash test [h] RTC test NandFlash test [j] UART test [k] Embedded LAN test [l] LED test [m] Buzzer test [n] RLTK 8100 LAN test [o] Dio test [p] SW Button test [q] USB test [r] SRAM test Switch Board test [t] CAN Board test Cardbus LAN Card test [v] EMP-2422 test [w] Init RedBoot Config [x] RF test =============================================================================== Please input the select : 0 =============================================================================== Load method select : 0. Load from LAN 1. Load from serial with Xmodem z. Abort select. =============================================================================== Please select item : 0 Please input load file name.. Default file name : redboot.bin User Input file name : UC-8481-LX_2710_B00.bos Trying NPE-A...success. Using NPE-A with PHY 16. Using default protocol (TFTP) | Raw file loaded 0x00800000-0x008a98bf, assumed entry at 0x00800000 load_address_end : [0x8a98c0] [a98c0] ... Unlock from 0x50000000-0x50100000: ........ *************** WARNING *************** *** Writing Flash Now *** *** Please Do Not Power Off Device! *** *************************************** ... Erase from 0x50000000-0x50100000: ........ ... Program from 0x00800000-0x00900000 at 0x50000000: ........ fis lock -f 0x50000000 -l 0x100000 ... Lock from 0x50000000-0x50100000: ........ ************************************************** ** ** ** Update OK! Please Power Cycle Device! ** ** ** ************************************************** 1.2. Power-off, Power-on UC-8481-LX with "DEL" key pressed to enter the new bootloader Configure the [0] Network Configuration ================================<<<Main Menu>>>================================ Boot Loader Version 2.7.1 B00 Kernel Version 3.0.4 CPU Endian: LE Make date: Nov 1 2013 19:30:27 Module Type: UC-8481-LX [0x80008481] Serial number:6 MAC Address(NPE): PORT1-00:90:e8:81:51:63 PORT2-00:90:e8:81:51:64 MAC Address(WAPN001): PORT1-ad:de:00:01:00:03 =============================================================================== [0] Network Configuration [1] Format User Disk [2] Firmware Upgrade [3] Enable/Disable Debian ARM Boot [4] Reboot =============================================================================== Please input the select : 0 ================================<<<Main Menu>>>================================ Boot Loader Version 2.7.1 B00 Kernel Version 3.0.4 CPU Endian: LE Make date: Nov 1 2013 19:30:27 Module Type: UC-8481-LX [0x80008481] Serial number:6 MAC Address(NPE): PORT1-00:90:e8:81:51:63 PORT2-00:90:e8:81:51:64 MAC Address(WAPN001): PORT1-00:03:00:03:00:03 =============================================================================== [0] Network Configuration [1] Format User Disk [2] Firmware Upgrade [3] Enable/Disable Debian ARM Boot [4] Reboot =============================================================================== Please input the select : 0 ================================<<<TFTP Menu>>>================================ [0] Default Setting [1] User define [2] View setting [q] Quit this menu. =============================================================================== Please input the select : 1 Local IP Address : 192.168.31.166 bootp_my_ip: Setting to 192.168.31.166 bootp_my_ip_mask: Setting to 255.0.0.0 Server IP Address : 192.168.31.161 bootp_server_ip: Setting to 192.168.31.161 Set OK! UC-8418-LX_2680_C00.zip Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now